Initial commit

meta-raspberrypi/conf/machine/raspberrypi3-64.conf

@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi 3 Development Board
+#@DESCRIPTION: Machine configuration for the RaspberryPi 3 in 64 bits mode
+
+MACHINEOVERRIDES =. "raspberrypi3:"
+
+MACHINE_EXTRA_RRECOMMENDS += "\
+    linux-firmware-rpidistro-bcm43430 \
+    linux-firmware-rpidistro-bcm43455 \
+    bluez-firmware-rpidistro-bcm43430a1-hcd \
+    bluez-firmware-rpidistro-bcm4345c0-hcd \
+"
+
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+include conf/machine/include/rpi-base.inc
+
+RPI_KERNEL_DEVICETREE = " \
+    broadcom/bcm2710-rpi-3-b.dtb \
+    broadcom/bcm2710-rpi-3-b-plus.dtb \
+    broadcom/bcm2837-rpi-3-b.dtb \
+    broadcom/bcm2710-rpi-cm3.dtb \
+    "
+
+SDIMG_KERNELIMAGE ?= "kernel8.img"
+# When u-boot is enabled we need to use the "Image" format and the "booti"
+# command to load the kernel
+KERNEL_IMAGETYPE_UBOOT ?= "Image"
+# "zImage" not supported on arm64 and ".gz" images not supported by bootloader yet
+KERNEL_IMAGETYPE_DIRECT ?= "Image"
+KERNEL_BOOTCMD ?= "booti"
+UBOOT_MACHINE = "rpi_arm64_config"
+SERIAL_CONSOLES ?= "115200;ttyS0"
+
+VC4DTBO ?= "vc4-fkms-v3d"
+ARMSTUB ?= "armstub8.bin"