Initial commit

meta-phosphor/recipes-extended/pam/libpam/convert-pam-configs.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=Convert PAM config files
+
+[Service]
+RemainAfterExit=yes
+Type=oneshot
+ExecStart=/usr/bin/convert-pam-configs.sh
+
+[Install]
+WantedBy=multi-user.target

meta-phosphor/recipes-extended/pam/libpam/convert-pam-configs.sh

@@ -0,0 +1,48 @@
+#!/bin/sh
+# Convert OpenBMC linux-PAM config files
+
+# Location of config files this script modifies:
+#   PAM_CONF_DIR - path to the PAM config files
+#   SECURITY_CONF_DIR - path to the security config files
+PAM_CONF_DIR=/etc/pam.d
+SECURITY_CONF_DIR=/etc/security
+
+# Handle common-password:
+#   Change cracklib to pwquality and handle the minlen parameter
+pam_cracklib=$(grep "^password.*pam_cracklib.so" ${PAM_CONF_DIR}/common-password)
+if [ -n "${pam_cracklib}" ]
+then
+    echo "Changing ${PAM_CONF_DIR}/common-password to use pam_pwquality.so (was pam_cracklib.so)" >&2
+    minlen=$(echo "${pam_cracklib}" | sed -e "s/.*minlen=\([[:alnum:]]*\).*/\1/")
+    echo "  Converting parameter minlen=${minlen} to ${SECURITY_CONF_DIR}/pwquality.conf minlen" >&2
+    sed -i.bak -e "s/^minlen=.*/minlen=$minlen/" ${SECURITY_CONF_DIR}/pwquality.conf
+    pwquality='password        [success=ok default=die]        pam_pwquality.so debug'
+    sed -i.bak -e "s/^password.*pam_cracklib.so.*/$pwquality/" ${PAM_CONF_DIR}/common-password
+    echo "# This file was converted by $0" >>${PAM_CONF_DIR}/common-password
+fi
+
+# Handle common-auth:
+#   Change tally2 to faillock and handle the deny & unlock_time parameters
+pam_tally2=$(grep "^auth.*pam_tally2.so" ${PAM_CONF_DIR}/common-auth)
+if [ -n "${pam_tally2}" ]
+then
+    echo "Changing ${PAM_CONF_DIR}/common-auth to use pam_faillock.so (was pam_tally2.so)" >&2
+    deny=$(echo "${pam_tally2}" | sed -e "s/.*deny=\([[:alnum:]]*\).*/\1/")
+    unlock_time=$(echo "${pam_tally2}" | sed -e "s/.*unlock_time=\([[:alnum:]]*\).*/\1/")
+    # Change faillock.conf parameters
+    echo "  Converting parameter deny=${deny} to ${SECURITY_CONF_DIR}/faillock.conf deny" >&2
+    echo "  Converting parameter unlock_time=${unlock_time} to ${SECURITY_CONF_DIR}/faillock.conf unlock_time" >&2
+    sed -i.bak \
+        -e "s/^deny=.*/deny=$deny/" \
+        -e "s/^unlock_time=.*/unlock_time=$unlock_time/" \
+        ${SECURITY_CONF_DIR}/faillock.conf
+    # Change pam_tally2 to pam_faillock (changes the overall auth stack)
+    authfail='auth    [default=die]                   pam_faillock.so authfail'
+    authsucc='auth    sufficient                      pam_faillock.so authsucc'
+    sed -i.bak \
+        -e "/^auth.*pam_tally2.so.*$/d" \
+        -e "/^auth.*pam_deny.so/i $authfail\n$authsucc" \
+        ${PAM_CONF_DIR}/common-auth
+    echo "# This file was converted by $0" >>${PAM_CONF_DIR}/common-auth
+fi
+

meta-phosphor/recipes-extended/pam/libpam/faillock.conf

@@ -0,0 +1,2 @@
+deny=0
+unlock_time=0

meta-phosphor/recipes-extended/pam/libpam/pam.d/common-account

@@ -0,0 +1,28 @@
+#
+# /etc/pam.d/common-account - authorization settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authorization modules that define
+# the central access policy for use on the system.  The default is to
+# only deny service to users whose accounts are expired in /etc/shadow.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+#
+
+# here are the per-package modules (the "Primary" block)
+account	[success=2 new_authtok_reqd=done default=ignore]	pam_unix.so
+-account [success=1 new_authtok_reqd=done default=ignore]    	pam_ldap.so	 ignore_unknown_user ignore_authinfo_unavail
+# here's the fallback if no module succeeds
+account	requisite			pam_deny.so
+# Announce if faillock is blocking access
+account	required			pam_faillock.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+account	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+# end of pam-auth-update config

meta-phosphor/recipes-extended/pam/libpam/pam.d/common-auth

@@ -0,0 +1,26 @@
+#
+# /etc/pam.d/common-auth - authentication settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authentication modules that define
+# the central authentication scheme for use on the system
+# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
+# traditional Unix authentication mechanisms.
+
+# here are the per-package modules (the "Primary" block)
+# Try for local user first, and then try for ldap
+auth	[success=2 default=ignore]	pam_unix.so quiet
+-auth    [success=1 default=ignore]  	pam_ldap.so ignore_unknown_user ignore_authinfo_unavail
+# Control gets here when no authentication module succeeds.  Increment the
+# failure tally and return failure status to PAM.
+auth    [default=die]                   pam_faillock.so authfail
+# Control gets here when authentication succeeds.  Check if the user is locked
+# out due to consecutive authentication failures and return status accordingly.
+auth    sufficient                      pam_faillock.so authsucc
+# If authsucc failed, deny access
+auth    requisite                       pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+auth    required                        pam_permit.so
+# and here are more per-package modules (the "Additional" block)

meta-phosphor/recipes-extended/pam/libpam/pam.d/common-password

@@ -0,0 +1,27 @@
+#
+# /etc/pam.d/common-password - password-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define the services to be
+# used to change user passwords.  The default is pam_unix.
+
+# Explanation of pam_unix options:
+#
+# The "sha512" option enables salted SHA512 passwords.  Without this option,
+# the default is Unix crypt.  Prior releases used the option "md5".
+#
+# See the pam_unix manpage for other options.
+
+# here are the per-package modules (the "Primary" block)
+password	[success=ok default=die]	pam_pwquality.so debug
+password	[success=ok default=die]	pam_ipmicheck.so spec_grp_name=ipmi use_authtok
+password	[success=ok ignore=ignore default=die]	pam_pwhistory.so debug enforce_for_root remember=0 use_authtok
+password	[success=ok default=die]	pam_unix.so sha512 use_authtok
+password	[success=1 default=die] 	pam_ipmisave.so spec_grp_name=ipmi spec_pass_file=/etc/ipmi_pass key_file=/etc/key_file
+# here's the fallback if no module succeeds
+password	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+password	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)

meta-phosphor/recipes-extended/pam/libpam/pam.d/common-session

@@ -0,0 +1,19 @@
+#
+# /etc/pam.d/common-session - session-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of sessions of *any* kind (both interactive and
+# non-interactive).
+#
+
+# here are the per-package modules (the "Primary" block)
+session	[default=1]			pam_permit.so
+# here's the fallback if no module succeeds
+session	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+session	required	pam_unix.so quiet