jim.lai/OpenBMC
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
Your Name
2026-04-23 17:07:55 +08:00
commit b7e39e063b
16725 changed files with 1625565 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/witherspoon/zones.yaml
+100
View File
@@ -0,0 +1,100 @@
manager_configuration:
power_on_delay: 20
zone_configuration:
#Air cooled zones
- zone_conditions:
- name: air_cooled_chassis
zones:
- zone: 0
cooling_profiles:
- air
- all
full_speed: 10500
default_floor: 8000
increase_delay: 5
decrease_interval: 30
interfaces:
- name: xyz.openbmc_project.Control.ThermalMode
properties:
- name: Supported
type: array[string]
values:
- value: DEFAULT
description: >
Default thermal control mode
- value: CUSTOM
description: >
Custom thermal control mode for handling the use of
PCI cards located behind the GPU exhaust that
could overtemp where the default mode is not
sufficient enough.
- value: HEAVY_IO
description: >
Heavy IO thermal control mode for handling the use
of PCI cards that produce heavy IO utilization and
could overtemp.
- value: MAX_BASE_FAN_FLOOR
description: >
Maximum base fan floor mode is for handling the
use of any hardware that requires the highest
amount of cooling even when the system may be idle.
- name: Current
type: string
persist: true
values:
- value: DEFAULT
description: >
Set current thermal control mode to the
default which will be replaced on startup if
another selected mode was persisted.
#Water cooled zones
- zone_conditions:
- name: water_and_air_cooled_chassis
zones:
- zone: 0
cooling_profiles:
- water
- all
full_speed: 10500
default_floor: 8000
increase_delay: 5
decrease_interval: 30
interfaces:
- name: xyz.openbmc_project.Control.ThermalMode
properties:
- name: Supported
type: array[string]
values:
- value: DEFAULT
description: >
Default thermal control mode
- value: CUSTOM
description: >
Custom thermal control mode for handling the use of
PCI cards located behind the GPU exhaust that
could overtemp where the default mode is not
sufficient enough.
- value: HEAVY_IO
description: >
Heavy IO thermal control mode for handling the use
of PCI cards that produce heavy IO utilization and
could overtemp.
- value: MAX_BASE_FAN_FLOOR
description: >
Maximum base fan floor mode is for handling the
use of any hardware that requires the highest
amount of cooling even when the system may be idle.
- name: Current
type: string
persist: true
values:
- value: DEFAULT
description: >
Set current thermal control mode to the
default which will be replaced on startup if
another selected mode was persisted.