Initial commit

meta-ibm/recipes-phosphor/chassis/vrm-control/ibm-ac-server/ir35221-unbind-bind.sh

@@ -0,0 +1,82 @@
+#!/bin/bash
+# #########################################################
+# Script to run on witherspoon BMC to unbind/bind the ir35221
+# driver's devices
+
+status=0
+max_retries=3
+driver_path="/sys/bus/i2c/drivers/ir35221/"
+platform_path="/sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/"
+
+unbind_driver () {
+    echo "$1" > $driver_path/unbind
+}
+
+bind_driver () {
+    device=$1
+    tries=0
+
+    until [ $tries -ge $max_retries ]; do
+        tries=$((tries+1))
+        ret=0
+        # shellcheck disable=SC2320
+        echo "$device" > $driver_path/bind || ret=$?
+        if [ $ret -ne 0 ]; then
+            echo "VRM $1 bind failed. Try $tries"
+            sleep 1
+        else
+            tries=$((max_retries+1))
+        fi
+    done
+
+    #Script will return a nonzero value if any binds fail.
+    if [ "$ret" -ne 0 ]; then
+        status=$ret
+    fi
+}
+
+if [ "$1" = "unbind" ]
+then
+    if [ -e $driver_path/4-0070 ]
+    then
+        unbind_driver "4-0070"
+    fi
+
+    if [ -e $driver_path/4-0071 ]
+    then
+        unbind_driver "4-0071"
+    fi
+
+    if [ -e $driver_path/5-0070 ]
+    then
+        unbind_driver "5-0070"
+    fi
+
+    if [ -e $driver_path/5-0071 ]
+    then
+        unbind_driver "5-0071"
+    fi
+elif [ "$1" = "bind" ]
+then
+    if [ -e $platform_path/1e78a140.i2c-bus/i2c-4/4-0070 ]
+    then
+        bind_driver "4-0070"
+    fi
+
+    if [ -e $platform_path/1e78a140.i2c-bus/i2c-4/4-0071 ]
+    then
+        bind_driver "4-0071"
+    fi
+
+    if [ -e $platform_path/1e78a180.i2c-bus/i2c-5/5-0070 ]
+    then
+        bind_driver "5-0070"
+    fi
+
+    if [ -e $platform_path/1e78a180.i2c-bus/i2c-5/5-0071 ]
+    then
+        bind_driver "5-0071"
+    fi
+fi
+
+exit "$status"

meta-ibm/recipes-phosphor/chassis/vrm-control/ir35221-on-bind@.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=Power on bind ir35221 device driver devs
+After=avsbus-enable@%i.service
+Wants=obmc-host-start-pre@%i.target
+Before=obmc-host-start-pre@%i.target
+Conflicts=obmc-chassis-poweroff@%i.target
+ConditionPathExists=!/run/openbmc/chassis@%i-on
+
+[Service]
+ExecStart=/usr/bin/ir35221-unbind-bind.sh bind
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=obmc-chassis-poweron@%i.target

meta-ibm/recipes-phosphor/chassis/vrm-control/ir35221-on-unbind@.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=power on mode unbind ir35221 device driver devs
+Wants=obmc-power-start-pre@%i.target
+Before=obmc-power-start-pre@%i.target
+Conflicts=obmc-chassis-poweroff@%i.target
+ConditionPathExists=!/run/openbmc/chassis@%i-on
+
+[Service]
+ExecStart=/usr/bin/ir35221-unbind-bind.sh unbind
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=obmc-chassis-poweron@%i.target

meta-ibm/recipes-phosphor/chassis/vrm-control/vrm-control.sh

@@ -0,0 +1,155 @@
+#!/bin/bash
+# #########################################################
+# Script to run on witherspoon BMC to read/set vrm voltages
+
+
+# #########################################################
+function d2v() {
+    # usage:   d2v <decimal volts>
+
+    echo "$1" | awk '{print $1 * 256 + .5}' | cut -d '.' -f 1
+}
+
+
+# #########################################################
+function v2d() {
+    # usage:   v2d <hex val>
+
+    printf "	%0.3fV" "$(echo "$1" | awk '{print $1 / 256}')"
+}
+
+
+# #########################################################
+function i2d() {
+    # usage:  i2d <hex val> <current divisor>
+
+    # parse current mantisa and exponent
+    # format: SEEE ESMM MMMM MMMM
+    e=$(( $1/0x800 ))
+    esign=$(( e/0x10 ))
+    m=$(( $1 & 0x07FF ))
+    msign=$(( m/0x0400 ))
+
+    if [ $msign -eq 1 ]
+    then
+        # calc ones compliment
+        m=$(( (m^0x07FF)+1 ))
+        m=$(( -m ))
+    fi
+    if [ $esign -eq 1 ]
+    then
+        # calc ones compliment
+        e=$(( (e^0x1F)+1 ))
+        e=$(( -e ))
+    fi
+    printf "	%0.3fA\n" "$(echo $m $e "$2" | awk '{print ($1 * 2^$2)}')"
+}
+
+
+# #########################################################
+function rw_vc() {
+    # usage:   rw_vc <bus> <addr> <current divisor> <channel> <value>
+
+    # select channel
+    if [ "$4" != "x" ]
+    then
+        i2cset -y "$1" "$2" 0 "$4" b
+    fi
+
+    # write new voltage set point
+    if [ ! -e "$5" ]
+    then
+        i2cset -y "$1" "$2" 0x21 "$(d2v "$5")" w
+    fi
+
+    # print voltage set point
+    v2d "$(i2cget -y "$1" "$2" 0x21 w)"
+
+    # print voltage
+    v2d "$(i2cget -y "$1" "$2" 0x8B w)"
+
+    # print current
+    i2d "$(i2cget -y "$1" "$2" 0x8C w)" "$3"
+
+    # default back to channel 0
+    if [ "$4" != "x" ]
+    then
+        i2cset -y "$1" "$2" 0 0 b
+    fi
+}
+
+
+# #########################################################
+# Main
+
+if [ -e "$1" ]
+then
+    $0 vdda vcsa vdna vioa vddra vppa vddb vcsb vdnb viob vddrb vppb
+    exit
+fi
+
+if [ "$1" == "-h" ]
+then
+    echo "  Usage: vrm [<rail>=[value] [<rail>=[value]] ...]"
+    echo "    rail: vdda vcsa vdna vioa vddra vppa vddb vcsb vdnb viob vddrb vppb vdnd viod"
+    echo "    value: volts"
+    echo
+    echo "    e.g., vrm vioa=1.0 viob=1.0"
+    echo
+    exit
+fi
+
+echo "rail	set	read	current"
+echo "-------	------- ------- -------"
+for param in "${@:1}"
+do
+    rail=$(echo "$param" | cut -d'=' -f 1)
+    val=$(echo "${param}=" | cut -d'=' -f 2)
+    echo -n "$rail"
+    case "$rail" in
+        vdda)
+            rw_vc 4 0x70 2 0 "$val"
+            ;;
+        vddb)
+            rw_vc 5 0x70 2 0 "$val"
+            ;;
+        vcsa)
+            rw_vc 4 0x70 4 1 "$val"
+            ;;
+        vcsb)
+            rw_vc 5 0x70 4 1 "$val"
+            ;;
+        vdna)
+            rw_vc 4 0x71 2 0 "$val"
+            ;;
+        vdnb)
+            rw_vc 5 0x71 2 0 "$val"
+            ;;
+        vioa)
+            rw_vc 4 0x40 2 x "$val"
+            ;;
+        viob)
+            rw_vc 5 0x40 2 x "$val"
+            ;;
+        vddra)
+            rw_vc 4 0x71 2 1 "$val"
+            ;;
+        vddrb)
+            rw_vc 5 0x71 2 1 "$val"
+            ;;
+        vppa)
+            rw_vc 12 0x41 2 x "$val"
+            ;;
+        vppb)
+            rw_vc 13 0x41 2 x "$val"
+            ;;
+        vdnd)
+            rw_vc 2 0x70 2 0 "$val"
+            ;;
+        viod)
+            rw_vc 2 0x70 2 1 "$val"
+            ;;
+        *)
+            echo "	non-existant"
+    esac
+done

meta-ibm/recipes-phosphor/chassis/vrm-control/vrm-control@.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=Apply voltage overrides to VRMs
+Wants=avsbus-disable@%i.service
+After=avsbus-disable@%i.service
+Before=avsbus-enable@%i.service
+Conflicts=obmc-chassis-poweroff@%i.target
+ConditionPathExists=!/run/openbmc/chassis@%i-on
+
+[Service]
+ExecStart=/usr/bin/vrm-control.sh vdna=0.9 vdnb=0.9
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=obmc-chassis-poweron@%i.target