diff --git a/meta-luxshare/meta-bhs/recipes-phosphor/dimm/dimm-spd-reader/dimmSpdReader.cpp b/meta-luxshare/meta-bhs/recipes-phosphor/dimm/dimm-spd-reader/dimmSpdReader.cpp
index cd730713..7438cbd3 100755
--- a/meta-luxshare/meta-bhs/recipes-phosphor/dimm/dimm-spd-reader/dimmSpdReader.cpp
+++ b/meta-luxshare/meta-bhs/recipes-phosphor/dimm/dimm-spd-reader/dimmSpdReader.cpp
@@ -346,7 +346,7 @@ static int i3cWriteRead(std::string& i3cDev, uint8_t wBuf[], uint16_t wLen,
         std::cout << "i3c data to write:" << std::endl;
         for(int i=0; i<wLen; i++)
         {
-            std::cout << "wBuf[" << i << "]: " << (int)wBuf[i] << " ";
+			std::cout << "wBuf[" << i << "]: 0x" << std::hex << (int)wBuf[i] << std::dec << " ";
         }
         std::cout << std::endl;
     }
@@ -391,8 +391,12 @@ static int i3cWriteRead(std::string& i3cDev, uint8_t wBuf[], uint16_t wLen,
 
     if constexpr (debug)
     {
-        std::cout << "i3c received data:" << std::endl;
-        std::cout << "rBuf[0]: " << (int)rBuf[0] << std::endl;
+        std::cout << "i3c received data:\n";
+        for (int i = 0; i < (int)rLen; i++)
+        {
+			std::cout << "rBuf[" << i << "]: 0x" << std::hex << (int)rBuf[i] << std::dec << " ";
+        }
+        std::cout << "\n";
     }
 
     close(fd);
@@ -452,7 +456,8 @@ int DIMMSpdReader::getPmicType(uint8_t cpuid, uint8_t rank)
 
     uint8_t index[] = {0xc8, 0xcc, 0xd0};
     uint16_t wLen = 2;
-    uint8_t wrBuf[] = {0, 0};
+//Jim debug	uint8_t wrBuf[] = {0, 0};
+    uint8_t wrBuf[] = {0, 0, 0}; //Jim debug
     uint8_t rdBuf[] = {0};
     uint16_t rLen = 1;
     int spd = NUM_TO_SPD(rank);
@@ -494,6 +499,101 @@ int DIMMSpdReader::getPmicType(uint8_t cpuid, uint8_t rank)
 
     gotType[cpuid][rank] = true;
 
+//Jim debug+S
+
+//----------------------------------------------------------------------------
+//A. 1B Write R30 = 0x84 // 1 byte format, set 2 byte mode
+//B. 2B Read R0030 //check 2 byte mode
+//	if(R0030 == 0x84)
+// 		2 byte mode + 1ms delay: R30 success
+//	Else // Original 2 byte mode
+//		C. 2B Write R0030 = 0x84
+//		D. 2B Read R0030
+//		if(R0030 == 0x84) //check 2 byte mode
+// 			2 byte mode + 1ms delay: R30 success
+	if (pmicType[cpuid][rank] == PMIC5030)
+	{
+
+	    int pmic = NUM_TO_PMIC(rank);
+	    std::string i3cPmicName = I3C_ADDR(cpuid) + to_hex(pmic);
+	
+		if constexpr (debug)
+        {
+		    std::cout << "is PMIC5030"<< std::endl;
+        }
+		// 1. 1B Write R30 = 0x84
+	    wLen = 2;
+		rLen = 0;
+	    wrBuf[0] = 0x30; wrBuf[1] = 0x84;
+	    rdBuf[0] = 0x00;
+	    ret = i3cWriteRead(i3cPmicName, wrBuf, wLen, rdBuf, rLen);
+	    if (ret < 0)
+	    {
+	        return -1;
+	    }
+
+	    if constexpr (debug)
+	    {
+			std::cout << "first 1B Write R30 = 0x84" << std::endl;
+	    }
+		std::this_thread::sleep_for(std::chrono::milliseconds(9));
+
+		// 2. 2B Read R0030
+	    wLen = 2;
+		rLen = 1;
+	    wrBuf[0] = 0x30; wrBuf[1] = 0x00;
+	    rdBuf[0] = 0x00;
+	    ret = i3cWriteRead(i3cPmicName, wrBuf, wLen, rdBuf, rLen);
+	    if (ret < 0)
+	    {
+	        return -1;
+	    }
+
+	    if constexpr (debug)
+	    {
+			std::cout << "2B Read R0030 = 0x" << std::hex << (int)rdBuf[0] << std::endl;
+	    }
+
+
+		// Successful switch to 2 Byte mode
+		if(rdBuf[0] == 0x84)
+		{
+			if constexpr (debug)
+	        {
+			    std::cout << "Is 2 Byte mode" << std::endl;
+			}			
+		}		
+		// It was originally 2 bytes mode
+		else
+		{
+			//C2-2. 2B Write R30 = 0x84
+			wrBuf[0] = 0x30; wrBuf[1] = 0x00; wrBuf[2] = 0x84;
+			wLen = 3;
+			rLen = 0;
+	    	ret = i3cWriteRead(i3cPmicName, wrBuf, wLen, rdBuf, rLen);
+			
+			std::this_thread::sleep_for(std::chrono::milliseconds(9));
+			//C2-2. 2B Read R30 = 0x84
+			wrBuf[0] = 0x30; wrBuf[1] = 0x00;
+			wLen = 2;
+			rLen = 1;
+	    	ret = i3cWriteRead(i3cPmicName, wrBuf, wLen, rdBuf, rLen);
+			if constexpr (debug)
+	        {
+			    std::cout << "2B Read R0030 = " << std::hex << (int)rdBuf[0] << std::endl;
+			}
+
+			//Force the use of 1-byte mode
+			if(rdBuf[0] != 0x84)
+	        {
+	        	twoByteMode[cpuid][rank] = false;
+			    std::cout << "Force the use of 1-byte mode" << std::endl;
+			}
+
+		}
+	}
+	
+//Jim debug+E
     if constexpr (debug)
     {
         std::cout << "pmicType[" << (int)cpuid << "][" << (int)rank << "] = "<< (int)pmicType[cpuid][rank] << std::endl;
@@ -635,9 +735,11 @@ int DIMMSpdReader::getDIMMRegsVol(uint8_t cpuid, uint8_t rank, DimmData& dimmDat
 
     int index = (pmicType[cpuid][rank] == PMIC5030) ? 6 : 4;
     for(int i=0; i<index; i++) {
-        rLen = 1;
+		//Write R30
+        rLen = 0; //Jim debug, For Renesas requirements, I3C write commands cannot be directly read; reading requires a separate I3C command.
         if(twoByteMode[cpuid][rank])
         {
+        	adcValue = 0x4; //Jim debug, PMIC5030 fixed the 2 byte mode + 1ms
             wrBuf[2] = adcValue | adcSel[i];
             wLen = 3;
         }
@@ -652,8 +754,14 @@ int DIMMSpdReader::getDIMMRegsVol(uint8_t cpuid, uint8_t rank, DimmData& dimmDat
         {
             return -1;
         }
-
-        std::this_thread::sleep_for(std::chrono::milliseconds(adcDelay[cpuid][rank]));
+//Jim debug		std::this_thread::sleep_for(std::chrono::milliseconds(adcDelay[cpuid][rank]));
+//Jim debug+S
+		// For Renesas requirements, the JESD spec PMIC5030 needs a 9ms delay.
+		if(pmicType[cpuid][rank] == PMIC5030)
+        	std::this_thread::sleep_for(std::chrono::milliseconds(9));
+		else
+			std::this_thread::sleep_for(std::chrono::milliseconds(adcDelay[cpuid][rank]));
+//Jim debug+E
 
         wLen = twoByteMode[cpuid][rank] ? 2 : 1;
         rLen = 1;
@@ -700,6 +808,7 @@ static double calStep31CurPower(int index, const uint8_t (&temp)[8])
     return result;
 }
 
+
 int DIMMSpdReader::getDIMMRegsCurAndPow(uint8_t cpuid, uint8_t rank, DimmData& dimmData)
 {
     int ret = -1;
@@ -719,7 +828,8 @@ int DIMMSpdReader::getDIMMRegsCurAndPow(uint8_t cpuid, uint8_t rank, DimmData& d
     uint8_t adcSelect[] = {0x1b, 0, 0};
     uint16_t curOut[8];
     uint8_t temp[8];
-    uint8_t rdBuf[] = {0};
+    uint8_t rdBuf[] = {0, 0, 0, 0, 0, 0, 0, 0}; //Jim debug, For Renesas requirements, I3C command: Continuously read R100~R107
+//Jim debug    uint8_t rdBuf[] = {0};
     uint8_t wrBuf[] = {0, 0};
 
     int pmic = NUM_TO_PMIC(rank);
@@ -776,7 +886,7 @@ int DIMMSpdReader::getDIMMRegsCurAndPow(uint8_t cpuid, uint8_t rank, DimmData& d
         adcSelect[1] = rdBuf[0] & 0xbf;   //Read current
         wLen = 2;
     }
-
+	rLen = 0; //Jim debug, For Renesas requirements, I3C write commands cannot be directly read; reading requires a separate I3C command.
     ret = i3cWriteRead(i3cPmicName, adcSelect, wLen, rdBuf, rLen);
     if (ret < 0)
     {
@@ -785,19 +895,34 @@ int DIMMSpdReader::getDIMMRegsCurAndPow(uint8_t cpuid, uint8_t rank, DimmData& d
 
     std::this_thread::sleep_for(std::chrono::milliseconds(adcDelay[cpuid][rank]));
 
-    for(int i=0; i<index; i++) {
-        rLen = 1;
-        rdBuf[0] = 0;
+
+    if(accStep31)
+    {
+        rLen = 8;
+		memset(rdBuf, 0, sizeof(rdBuf));
         if(twoByteMode[cpuid][rank])
         {
-            wrBuf[0] = static_cast<uint8_t>(curOut[i] & 0xFF);
-            wrBuf[1] = static_cast<uint8_t>((curOut[i] >> 8) & 0xFF);
+            wrBuf[0] = static_cast<uint8_t>(curOut[0] & 0xFF);
+            wrBuf[1] = static_cast<uint8_t>((curOut[0] >> 8) & 0xFF);
             wLen = 2;
         }
         else
         {
-            wrBuf[0] = static_cast<uint8_t>(curOut[i]);
-            wLen = 1;
+            if constexpr (debug)
+            {
+            	std::cout << "twoByteMode[" << (int)cpuid << "][" << (int)rank << "] = "<< (int)twoByteMode[cpuid][rank] << std::endl;
+            }
+			if(pmicType[cpuid][rank] == PMIC5030)
+			{
+				return -1;
+			}
+			else
+			{
+		        for(int i=0; i<6; i++)
+		        {
+		            dimmData.current[i] = calStep31CurPower(i, temp);
+		        }
+			}
         }
 
         ret = i3cWriteRead(i3cPmicName, wrBuf, wLen, rdBuf, rLen);
@@ -805,24 +930,43 @@ int DIMMSpdReader::getDIMMRegsCurAndPow(uint8_t cpuid, uint8_t rank, DimmData& d
         {
             return -1;
         }
-
-        if(accStep31)
-        {
-            temp[i] = rdBuf[0];
-        }
-        else
-        {
-            dimmData.current[i] = rdBuf[0] * 125.0 / 1000.0;
-        }
-    }
-
-    if(accStep31)
-    {
+		for(int i=0; i<index; i++) {
+        	temp[i] = rdBuf[i];
+		}
+	    
         for(int i=0; i<6; i++)
         {
             dimmData.current[i] = calStep31CurPower(i, temp);
         }
     }
+	else
+    {
+		for(int i=0; i<index; i++) {
+	        rLen = 1;
+	        rdBuf[0] = 0;
+	        if(twoByteMode[cpuid][rank])
+	        {
+	            wrBuf[0] = static_cast<uint8_t>(curOut[i] & 0xFF);
+	            wrBuf[1] = static_cast<uint8_t>((curOut[i] >> 8) & 0xFF);
+	            wLen = 2;
+	        }
+	        else
+	        {
+	            wrBuf[0] = static_cast<uint8_t>(curOut[i]);
+	            wLen = 1;
+	        }
+
+	        ret = i3cWriteRead(i3cPmicName, wrBuf, wLen, rdBuf, rLen);
+	        if (ret < 0)
+	        {
+	            return -1;
+	        }
+
+	        dimmData.current[i] = rdBuf[0] * 125.0 / 1000.0;
+	        
+	    }
+	}
+    
 
     //start to read power
     if(twoByteMode[cpuid][rank])
@@ -835,7 +979,7 @@ int DIMMSpdReader::getDIMMRegsCurAndPow(uint8_t cpuid, uint8_t rank, DimmData& d
         adcSelect[1] |= 0x40;
         wLen = 2;
     }
-
+	rLen = 0; //Jim debug, For Renesas requirements, I3C write commands cannot be directly read; reading requires a separate I3C command.
     ret = i3cWriteRead(i3cPmicName, adcSelect, wLen, rdBuf, rLen);
     if (ret < 0)
     {
@@ -844,19 +988,34 @@ int DIMMSpdReader::getDIMMRegsCurAndPow(uint8_t cpuid, uint8_t rank, DimmData& d
 
     std::this_thread::sleep_for(std::chrono::milliseconds(adcDelay[cpuid][rank]));
 
-    for(int i=0; i<index; i++) {
-        rLen = 1;
-        rdBuf[0] = 0;
+	// For Renesas requirements, I3C command: Continuously read R100~R107
+    if(accStep31)
+    {
+        rLen = 8;
+        memset(rdBuf, 0, sizeof(rdBuf));
         if(twoByteMode[cpuid][rank])
         {
-            wrBuf[0] = static_cast<uint8_t>(curOut[i] & 0xFF);
-            wrBuf[1] = static_cast<uint8_t>((curOut[i] >> 8) & 0xFF);
+            wrBuf[0] = static_cast<uint8_t>(curOut[0] & 0xFF);
+            wrBuf[1] = static_cast<uint8_t>((curOut[0] >> 8) & 0xFF);
             wLen = 2;
         }
         else
         {
-            wrBuf[0] = static_cast<uint8_t>(curOut[i]);
-            wLen = 1;
+            if constexpr (debug)
+            {
+            	std::cout << "twoByteMode[" << (int)cpuid << "][" << (int)rank << "] = "<< (int)twoByteMode[cpuid][rank] << std::endl;
+            }
+			if(pmicType[cpuid][rank] == PMIC5030)
+			{
+				return -1;
+			}
+			else
+			{
+		        for(int i=0; i<6; i++)
+		        {
+		            dimmData.current[i] = calStep31CurPower(i, temp);
+		        }
+			}
         }
 
         ret = i3cWriteRead(i3cPmicName, wrBuf, wLen, rdBuf, rLen);
@@ -864,24 +1023,42 @@ int DIMMSpdReader::getDIMMRegsCurAndPow(uint8_t cpuid, uint8_t rank, DimmData& d
         {
             return -1;
         }
-
-        if(accStep31)
-        {
-            temp[i] = rdBuf[0];
-        }
-        else
-        {
-            dimmData.power[i] = rdBuf[0] * 125.0 / 1000.0;
-        }
-    }
-
-    if(accStep31)
-    {
-        for(int i=0; i<STATUS_PMIC_RAIL_NUM; i++)
+		for(int i=0; i<index; i++) {
+        	temp[i] = rdBuf[i];
+		}
+	    
+        for(int i=0; i<6; i++)
         {
             dimmData.power[i] = calStep31CurPower(i, temp);
         }
     }
+	else
+    {
+	    for(int i=0; i<index; i++)
+		{
+	        rLen = 1;
+	        rdBuf[0] = 0;
+	        if(twoByteMode[cpuid][rank])
+	        {
+	            wrBuf[0] = static_cast<uint8_t>(curOut[i] & 0xFF);
+	            wrBuf[1] = static_cast<uint8_t>((curOut[i] >> 8) & 0xFF);
+	            wLen = 2;
+	        }
+	        else
+	        {
+	            wrBuf[0] = static_cast<uint8_t>(curOut[i]);
+	            wLen = 1;
+	        }
+
+	        ret = i3cWriteRead(i3cPmicName, wrBuf, wLen, rdBuf, rLen);
+	        if (ret < 0)
+	        {
+	            return -1;
+	        }
+	        dimmData.power[i] = rdBuf[0] * 125.0 / 1000.0;
+		        
+		}
+	}
 
     return 0;
 }
@@ -994,7 +1171,7 @@ void DIMMSpdReader::readDimmInfo()
                 }
             }
             updateField(dimmName, TEMP, dData.temp, STATUS_TEMP_NUM);
-#if 0
+#if 1
             if(regCounter == 0)
             {
                 ret = getPmicStatusRegs(cpuid, i, dData);